The first ever nuclear fusion device to be wholly designed, built and operated by students is being planned for UNSW Sydney.
The program is part of the University’s Vertically Integrated Projects (VIP) scheme that is designed to engage undergraduate and postgraduate students in ambitious, long-term, multidisciplinary challenges led by UNSW academics. The program is being supported by industry partners Tokamak Energy and HB11 Energy.
The fusion construction project is headed up by nuclear engineering expert Dr Patrick Burr and aims to have a working device operating within two to three years.
Related article: HB11’s research celebrated in global laser fusion journal
Thermonuclear fusion is a process where atomic nuclei are massively heated up, typically to 150-300 million degrees Celcius, and then fused together under substantial force, releasing a large amount of energy in the process.
It is the same process that powers the sun and has the potential to provide clean and abundant energy on Earth if successfully harnessed. Fusion energy is one of the fastest growing energy sectors globally, and there is considerable work going on around the world to harness fusion as a future clean energy resource.
Fusion is the opposite reaction of nuclear fission, which powers conventional nuclear power plants. Instead of breaking up heavy elements like uranium, it fuses together light elements that are abundant on our planet, like hydrogen, or boron. The process does not rely on a chain reaction, and the by-product is helium, an inert gas and also a valuable resource.
UNSW’s first fusion-capable machine will be ‘tokamak’—a doughnut-shaped vacuum chamber with powerful magnets to control and heat streams of plasma to extreme temperatures, at which point nuclear fusion is possible.
This will potentially be followed by other devices that could achieve fusion using different methods, such as high-power lasers. Fusion is widely considered to be inherently safe since the process is not based on a chain reaction, as is the case with nuclear fission.
“It can be seen as an energy amplifier, rather than an energy generator, so when you turn off the switch there is nothing to amplify and the device shuts down, just like a lightbulb,” said Dr Burr.
Although the VIP project aims to create a fusion-capable machine, there is no intention to actually attempt to fuse hydrogen once it is built.
Even so, the UNSW team will also work closely with the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) and the Australian Safeguards and Non-Proliferation Office (ASNO), to ensure the project remains compliant with all regulations.
“The tokamak device is small, around 1 metre by 1 metre, and during the initial build and testing the biggest risk is dealing with high voltages, which is a well-known hazard in our labs, for which we have special cages to keep everything very safe,” Dr Burr said.
“Being involved in nuclear engineering for many years, I am aware that new technology in this area can be very polarising.
Related article: Japanese firm raises ¥1.8B to advance laser fusion R&D
“Sometimes in the nuclear industry the engineering happens and then, almost as an afterthought, a spokesperson has to try to explain what the impacts are on society.
“But for this program we are determined to put the discussion about societal impact right at the front and centre.
“This is a cross-faculty project, including academics from social sciences and arts, and our VIP students will study and analyse what the public perception of fusion technology really is and discover how best we can engage with society to share the benefit it could bring.”